 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCC/HCF4502B STROBED HEX INVERTER/BUFFER .2TTL.3.COMMONOUTPUT.I .QUI .5V,10V,AND15VPARAMETRI .I .100%TESTEDFORQUI .MEETSALLREQUI LOAD OUTPUT DRIVE CAPABILITY STATE OUTPUTS DISABLE CONTROL NHIBIT CONTROL ESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE C RATINGS NPUT CURRENT OF 100nA AT 18V AND 25C FOR HCC DEVICE ESCENT CURRENT REMENTS OF JEDEC TENTATIVE STANDARD N. 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES" EY (Plastic Package) F (Ceramic Frit Seal Package) M1 Micro Package C1 (Plastic Chip Carrier) ORDER CODES : HCC4502BF HCF4502BM1 HCF4502BEY HCF4502BC1 PIN CONNECTIONS DESCRIPTION The HCC4502B (extended temperature range) and HCF4502B (intermediate temperature range) are monolithic integrated circuit, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF 4502B consists of six inverter-buffers with 3-state outputs. A logic "1" on the OUTPUT DISABLE input produces a highimpedance state in all six outputs. This feature permits common busing of the outputs, thus simplifying system design. A logic "1" on the INHIBIT input switches all six outputs to logic "0" if the OUTPUT DISABLE input is a logic "0". This device is capable of driving two standard TTL loads, which is equivalent to six times the JEDEC "B" series IOL standard. June 1989 1/11 HCC/HCF4502B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Vi II Pt ot Parameter Supply Voltage : HC C Types H C F Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range Operating Temperature : HCC Types H CF Types Storage Temperature Value - 0.5 to + 20 - 0.5 to + 18 - 0.5 to V DD + 0.5 10 200 100 - 55 to + 125 - 40 to + 85 - 65 to + 150 Unit V V V mA mW mW C C C Top Tstg Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : HC C Types H CF Types Input Voltage Operating Temperature : HCC Types H CF Types Value 3 to + 18 3 to + 15 0 to V DD - 55 to + 125 - 40 to + 85 Unit V V V C C TRUTH TABLE Disable 0 0 0 I X = don't care Z = high impedance Logic 1 = high Logic 0 = low Inhibit 0 0 I X Dn 0 I X X Qn 1 0 0 Z 2/11 HCC/HCF4502B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol IL Parameter Quiescent Current VI (V) Test Conditions VO | IO | V DD (V) (A) (V) 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 5 10 15 5 10 15 5 10 15 18 Any Input 0/15 0/18 0/15 Any Input 15 18 15 0.3 0.4 1.0 10-5 0.3 10-4 0.4 10-4 1.0 5 7.5 1 12 7.5 A pF T Lo w* Min. Max. 1 2 4 20 4 8 16 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -2 -0.64 - 1.6 - 4.2 -1.53 -0.52 - 1.3 - 3.6 3.84 9.6 25.2 3.11 7.05 20.4 0.1 Value 25 C Min. Typ. Max. 0.02 1 0.02 2 0.02 4 0.04 20 0.02 4 0.02 8 0.02 16 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.6 - 3.2 -0.51 - 1 - 1.3 - 2.6 - 3.4 - 6.8 -1.36 - 3.2 -0.44 - 1 - 1.1 - 2.6 - 3.0 - 6.8 3.06 6 7.8 15.6 20.4 40.8 2.6 6 6.63 15.6 17.3 40.8 10-5 0.1 T High* Min. Max. 30 60 120 600 30 60 120 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -1.15 -0.36 - 0.9 - 2.4 - 1.1 -0.36 - 0.9 - 2.4 2.10 5.4 14.4 2.10 5.61 14.2 1 Unit VOH VOL VIH 0/ 5 0/10 HCC Types 0/15 0/20 0/ 5 HCF 0/10 Types 0/15 Output High 0/ 5 Voltage 0/10 0/15 Output Low 5/0 Voltage 10/0 15/0 Input High Voltage Input Low Voltage Output Drive Current 0/ 5 0/ 5 0/10 0/15 0/ 5 0/ 5 0/10 0/15 0/ 5 0/10 0/15 0/ 5 0/10 0/15 0/18 A VIL IOH HCC Types HCF Types IOL Output Sink Current HCC Types HCF Types IIH, IIL Input Leakage Current HCC Types HCF Types 3-state HCC Output Types HCF Types Input Capacitance < < < < < < 0.5/4.5 < 1/9 < 1.5/13.5 < 4.5/0.5 < 9/1 < 13.5/1.5 < 2.5 4.6 9.5 13.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 0.4 0.5 1.5 1 1 1 1 1 1 1 1 1 1 1 1 V V V V mA mA A IOH, IOL CI * TLow= - 55C for HCC device : - 40C for HCF device. * THigh= + 125C for HCC device : + 85C for HCF device. The Noise Margin for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V. 3/11 HCC/HCF4502B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25 C, C L = 50 pF, R L = 200 k typical temperature coefficient for all V DD values is 0.3 %/C, all input rise and fall times = 20 ns) Symbol t P HL Parameter Data or Inhibit Delay Time Test Conditions V D D (V) Min. 5 10 15 tP LH Data or Inhibit Delay Time 5 10 15 t P HZ Disable Delay Time (output high to high impedance) 5 10 15 t P ZH Disable Delay Time (high impedance to output high) 5 10 15 t PL Z Disable Delay Time (output low to high impedance) 5 10 15 t PZ L Disable Delay Time (high impedance to output low) 5 10 15 tTLH Tansition Time 5 10 15 t T HL Transition Time 5 10 15 Value Typ. 135 60 40 190 90 65 60 40 30 110 50 40 125 65 55 125 55 40 100 50 40 60 30 20 Max. 270 120 80 380 180 30 120 80 60 220 100 80 250 130 110 250 110 80 200 100 80 120 60 40 ns ns ns ns ns ns ns ns Unit Minimum Output High (source) Current Characteristics. Typical Output Low (sink) Current. 4/11 HCC/HCF4502B Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Typical Transition Time vs. Load Capacitance. Typical Propagation Delay Time vs. Load Capacitance. TEST CIRCUIT Quiescent Device Current. Input Voltage. 5/11 HCC/HCF4502B TEST CIRCUIT (continued) Input Leakage Current. TEST CIRCUIT AND WAVEFORMS Disable Delay Time. Test Conditions Test Pin 1 5 t P HZ t PL Z t PZL t P ZH VSS V DD V DD VSS Point A VSS VDD VDD VSS 6/11 HCC/HCF4502B Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 7/11 HCC/HCF4502B Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 8/11 HCC/HCF4502B SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 9/11 HCC/HCF4502B PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 10/11 HCC/HCF4502B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 11/11 |
Price & Availability of HCC4502B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |